通風管道可以創造舒適的室內空氣環境和健康的生活環境，以及室內有害氣體和集中的熱量和濕度。使用前了解設備的技術要求，使用起來會更方便。下面小編就為大家介紹一下通風管道的主要功能和技術要求！
Ventilation ducts can create a comfortable indoor air environment and a healthy living environment, as well as indoor harmful gases and concentrated heat and humidity. It will be more convenient to understand the technical requirements of the equipment before use. The following editor will introduce the main functions and technical requirements of ventilation ducts!
濟南通風管道加工的主要作用是什么？
What is the main function of Jinan ventilation pipe processing?
1、在人口密集地區營造舒適的室內空氣環境。在大型、酒店、公共、會議展覽等人口密集的地區，對室內環境的要求非常高。借助通風管道，可將新鮮空氣導入室內，從而營造舒適的室內空氣環境。
1. Create a comfortable indoor air environment in densely populated areas. In densely populated areas such as large shopping malls, hotels, public, conferences and exhibitions, the requirements for indoor environment are very high. With the help of ventilation ducts, fresh air can be introduced indoors, thus creating a comfortable indoor air environment.
2、辦公及居住區的健康生活環境。對于上班族來說，辦公室和家是日常生活中相對較長的日子。要營造健康的生活環境，通風管道必不可少。出于對人性的關注，很多建筑在施工之初就通風良好。
2. Healthy living environment in office and residential areas. For office workers, office and home are relatively long days in daily life. To create a healthy living environment, ventilation ducts are essential. Out of concern for human nature, many buildings are well ventilated at the beginning of construction.
3、工業廠房區有害氣體和集中熱濕。在一些工業廠房、生產車間等場所，經常會產生一些有毒、有氣味的有害氣體，或者散發出大量的熱量和水分，給整個車間環境造成不適。通風管道的正確安裝會導致工業環境中的不適和健康危害。
3. Harmful gases and concentrated heat and humidity in the industrial plant area. In some industrial plants, production workshops and other places, it often produces some toxic and odorous harmful gases, or emits a lot of heat and moisture, causing discomfort to the entire workshop environment. Proper installation of ventilation ducts will cause discomfort and health hazards in the industrial environment.
What are the technical requirements for the processing of ventilation pipes in Jinan?
1、回風管和保溫材料風管不得有水平平縫。這一次，應使用矩形風管。底寬800mm內不得有接頭，800-1000mm內只有1個接頭，2400mm內不得有2個焊縫。以上所有尺碼均禁止水平鎖縫。
1. The return air duct and the air duct of thermal insulation materials shall not have horizontal flat joints. This time, rectangular ducts should be used. There shall be no joint within 800mm of bottom width, only one joint within 800-1000mm, and no two welds within 2400mm. Horizontal sewing is forbidden in all the above sizes.
2、組合式凈化送風機組送排風組合式機組采用組合式框架板結構，可現場直接安裝，外形美觀，安裝維修方便，漏風率小（當靜壓單位為1000Pa，漏風率小于1%）。維修板（即外殼）采用雙層夾芯板結構，保溫性能好，耐腐蝕。
2. Combined purification air supply unit combined air supply and exhaust unit adopts combined frame plate structure, which can be directly installed on site, with beautiful appearance, convenient installation and maintenance, and small air leakage rate (when the static pressure unit is 1000Pa, the air leakage rate is less than 1%). The maintenance board (i.e. shell) adopts double-layer sandwich board structure, which has good thermal insulation performance and corrosion resistance.
3、初、中、濾凈化過濾系統分為初、中、濾，可對車間粉塵進行除塵過濾。初效過濾器主要過濾5m塵粒，中效過濾器主要過濾1m塵粒。過濾器采用無隔板過濾器，過濾效率高達99.99%，容塵量大，使用壽命長。
3. The primary, intermediate and filtration purification filtration system is divided into primary, intermediate and filtration, which can remove dust and filter dust in the workshop. The primary efficiency filter mainly filters 5m dust particles, and the medium efficiency filter mainly filters 1m dust particles. The filter adopts a clapboard free filter, with a filtration efficiency of 99.99%, large dust capacity and long service life.
The above is the main functions and technical requirements of the ventilation duct. I hope the above content can be helpful to you. Thank you for your watching and support. Later, we will sort out more information for you. Please pay attention to our website http://www.jzfckj.net to update.
上一篇：分析排煙罩直吸的好還是側吸的好
下一篇：油煙凈化器前面的動態攔截裝置起到作用
