保持不銹鋼風管表面光滑干凈，放在寬闊干燥的隔潮木墊上，堆放整齊。不銹鋼板、鋁板要里靠在木架上，不要平迭，以防拖拽時劃傷表面，開料時應應用不產生刮痕的劃線工具。操作時應應用木槌或有橡膠皮套的錘頭，不得使用錘子，以防落錘點產生銹跡。

Keep the surface of the stainless steel air duct smooth and clean, place it on a wide and dry damp proof wooden mat, and stack it neatly. Stainless steel and aluminum plates should be leaned against the wooden frame and not stacked flat to prevent scratching the surface during dragging. When cutting, a marking tool that does not produce scratches should be used. When operating, a wooden hammer or a hammer head with a rubber cover should be used, and a hammer should not be used to prevent rust from forming at the drop point.

法蘭用材應歸類碼法放，室外預防要采取防雨、雪對策，降低銹蝕狀況。商品應碼放在平整無存水，寬敞的場所，碼放時應按系統編號，齊整、合理、便于運輸。商品搬運裝卸應輕拿輕放，以防毀壞成品。

The materials used for flanges should be classified and coded, and outdoor prevention measures should be taken to prevent rain and snow and reduce corrosion. The goods should be placed in a flat, water free, and spacious place. When stacking, they should be numbered according to the system, neat, reasonable, and easy to transport. The handling and loading of goods should be handled with care to prevent damage to the finished product.

還有一點值得注意在上漆時應使漆層勻稱，不能有沉積、漏涂、皺褶、氣泡及混色等缺陷。不銹鋼焊接風管在壓口時定先要噴一道防腐漆，確保咬縫內不易銹蝕。板材防腐油漆，根據設計實行。

Another point worth noting is that when painting, the paint layer should be evenly distributed and free from defects such as sedimentation, holidays, wrinkles, bubbles, and color mixing. When welding stainless steel air ducts, a layer of anti-corrosion paint should be sprayed first to ensure that the biting seam is not easily corroded. Board anti-corrosion paint, implemented according to the design.

不銹鋼風管是生活當中經常使用的一種設備。挑選品質好的商品對生產很有幫助。所謂風管就是用來運輸空氣的通風風管系統。隨著人們生活水平的提高，人們對生活質量和環境的需求也越來越高。

Stainless steel air duct is a commonly used equipment in daily life. Choosing high-quality products is very helpful for production. The so-called air duct is a ventilation duct system used to transport air. With the improvement of people's living standards, their demand for quality of life and the environment is also increasing.

1.保持鋼板表面光滑干凈，放在寬闊干燥的防潮木墊架上，堆放整齊。

1. Keep the surface of the steel plate smooth and clean, place it on a wide and dry moisture-proof wooden mat, and stack it neatly.

2.鋼板應立在木架上，不得平疊，以免拖動時劃傷表面，切割時應使用無劃痕的劃線工具。操作時應應用木槌或有橡膠皮套的錘頭，不得使用錘子，以防落錘點產生銹跡。

2. Steel plates should be erected on wooden frames and not stacked flat to avoid scratching the surface during dragging. Non scratch marking tools should be used during cutting. When operating, a wooden hammer or a hammer head with a rubber cover should be used, and a hammer should not be used to prevent rust from forming at the drop point.

3.法蘭用材應歸類碼放，室外要采取防雨、雪對策，降低銹蝕狀況。

3. The materials used for flanges should be classified and stacked, and rain and snow prevention measures should be taken outdoors to reduce corrosion.

4.成品不銹鋼風管應堆放在平整無水存放的地方.在寬敞的地方，碼放時要按系統編號，整齊整齊，.合理.便于運輸。

4. Finished stainless steel air ducts should be stacked in a flat and waterless storage area. In a spacious area, they should be stacked according to the system number, neat, reasonable, and easy to transport.

5.搬運裝卸應輕拿輕放，以防毀壞成品。

5. Handling and loading/unloading should be handled with care to prevent damage to the finished product.

上一篇：濟南通風管道是工業生產和建筑領域不可缺少的設備
下一篇：纖維織物通風風管的施工方式